PVC drain pipe scupper pipe extruder / extrusion machine / production line

PVC drain pipe scupper pipe extrusion line used to produce pvc pipe for drain or scupper.

PVC drain pipe could instead of traditional iron pipes,is widely used for building drainage.As the feature of light quality,corrosion resistance,difficult scaling and blocking,it is popular with the construction industry.

PVC Drain Pipe Production:  

PVC drain pipe could be made by single screw extruder or twin conical screw extruder.

For single screw extruder,it need the pvc granule(SG5).

For twin conical screw extruder,it need the pvc and CaCO3 powder.

Because the twin conical screw extruder is more efficient and lower materials cost,so we will introduce the 200mm-400mm twin conical screw extrusion line as an example:

Main technical parameters of Plastic extruder machine for PVC drain pipe (200mm-400mm) :

1. Suitable material:PVC powder,CaCO3 powder   

2. Output Capacity :400kg/h

The output capacity varies with the materials and the operation conditions.

3. Product specification: Φ200-400mm

4. Extrusion line speed: 0.5-2.5m/min 

5. The height of the centerline of the extruder: 1000mm 

6. Operation direction: From Left to right

The Plastic machine for PVC pipe (200mm-400mm) video:https://youtu.be/TtTVTBfYZG8

PVC Pipe Extruder / Extrusion Machinery Specification:

All the PVC pipe extruder / extrusion machine / production line:

 1. 80/156 double screw extruder      1set

    This machine is mainly used for pipe extrusion. It is equipped with hard tooth reducer. Gear, shaft is made of alloy steel, after carburizing, grinding processing. Screw, barrel material is 38CrMoAlA, nitriding processing, equipped with automatic control panel display, digital display intelligent temperature control instrument

   Contactor: Siemens. Frequency control: ABB.

2. Mould   200mm to 400mm    1set

   Using 40Gr high-quality die steel, high precision, long service life.

3. Cooling unit        1 set

   It is equipped with vacuum pump and water pump. It is used for the shaping and cooling of the pipes. It uses the circulating water in the tank. Water supply and drainage have valve control, equipped with front and rear, left and right sides height adjustment device, which can realize 3D calibration. It is made of stainless steel, to improve the quality of the circulating water.

4. Hauling-off machine     1 set

  The unit can haul off the pipes continuously and steadfastly. It features compact and service –free structure .

5. Cutting machine (the height of the centerline is 1000mm)       1 set

6. Stacker 1unit

  Length: 10000mm

Technology and Service:

1. Seller supply full set of technical document, cutter and other full document (write in English).  

2. Seller supply training for buyer’s staff until buyer can produce the eligible production independently.  

3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer’s factory.

4. Buyer should pay the expense for our engineers including for our engineer including round-

way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.

5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all 

conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing 

and testing these machines. Buyer should pay 60USD/day.

6. When installing,people of both sides cooperate well and carefully,buyer supplies convenient working 

condition,any problem, should discuss peacefully and kindly.

7. Buyer supply proper working tools, equipments and other conditions.

8. The expense including the accommodation and materials of the trial-

run the machine for testing and other expenses(electric, water, air and worker) will be on seller’s account,

 if the buyer or their representatives do the inspection of the machines before shipment.

9. Guarantee period: 14 months after shipment (the date of B/L)