Single Wall Corrugated Electric PVC Pipe Making Machine Single Screw Extrusion SJS manufacturer from China Qingdao Intermedios Plastic Machinery Co.,LTD

Single Wall Corrugated Electric PVC Pipe Making Machine Single Screw Extrusion

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: SJS

PVC PP PE Single Wall Corrugated Electrical Pipe Single Screw Extruder Machine

Features of HDPE /

PVC PP PE Single Wall Corrugated Electrical Pipe Single Screw Extruder Machine

Features of HDPE / PP / PVC Single Wall Pipe / Tubes:

1). It has good flexibility: to resist distortion, bending good performance Acid, lubricating oil, cooling fluid, etc
2). Exterior luster, friction resistance
3). Carrying capacity is strong, can bear the weight of the foot, doesn't break, deformation, can quickly recover, and itself without any damage

Introduction of PVC PP PE Single Wall Corrugated Electrical Pipe Single Screw Extruder Machine

It consists of automatic feeding system / single screw extruder / die head / forming machine / winder. It is mainly produce PE / PP / PVC single corrugated tube. The PE / PP / PVC single corrugated tube is mainly used in the golf course, playgrounds as light load of drainage, floods; Interior decoration cable casing; Automotive wire casing; The washing machine, air conditioner drain; Prestressed concrete special tube, etc.

Features of PPVC PP PE Single Wall Corrugated Electrical Pipe Single Screw Extruder Machine:

1). Adopt Electric-magnetic heater which can save 40% to 60% electric energy .
2). All electric parts ( breaker/relay/ inverter ) is SIEMENS/SCHNEIDER/OMRON
3). PLC control and simple operation
4). The forming machine has 38 pairs to 72 pairs forming block.
5). Production speed is 15m/min to 25m/min.

Technical Parameter of Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder:

MODEL

TECHNICAL

PARAMETER

Normal model

High speed model

GSDBGZ-65/30

SJDBGZ-30

SJDBGZ-45

SJDBGZ-50

SJDBGZ-65

Pipe range (mm)

4.5-9

9-32

16-63

9-58

L/D

30:1

Production capacity

30-40kg/h

30-50kg/h

60-80kg/h

60-100kg/h

Main motor power(kw)

18.5

Corrugators power(kw)

1.1

1.5

2.2

Pairs of moulds

Cooling model

Moulds adopt fan cooling and the bottom of mould template water cooling

Four water-circle cooling

Production speed(m/min)

6-10

8-12

25-30

Mould Connection mode

Adopt chains and chains plate to connection mould and mould

No chains

Technology and Service:

1.Seller supply full set of technical document, cutter and other full document (write in English) for the extrusion machine.
2. Seller supply training for buyer's staff until buyer can produce the eligible production independently.
3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer's factory.
4.Buyer should pay the expense for our engineers including for our engineer including round- way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.
5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all
conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing and testing these machines.Buyer should pay 60USD/day.
6. When installing, people of both sides cooperate well and carefully, buyer supplies convenient working
condition, any problem, should discuss peacefully and kindly.
7. Buyer supply proper working tools, equipments and other conditions.
8. The expense including the accommodation and materials of the trial-run the machine for testing and other
expenses(electric, water, air and worker) will be on seller's account, if the buyer or their representatives do the inspection of the machines before shipment.
9. Guarantee period:14 months after shipment (the date of B/L)