PP - R / PPR Polypropylene random water pipe extrusion line(16mm-110mm)

PP - R / PPR Polypropylene random water pipe extrusion line(16mm-110mm is mainly used in the manufacture of the plastic PPR pipes ,with 16mm-110mm tube pipe diameters .

PPR pipe feature:

1. Light weight

The PPR pipe density is 0.90g/cm3,the weight is only 11% of steel tube,could reduce the strength of installation greatly.

2. Good heat resistant performance

The instantaneous temperature of PPR tube could be 95,normal long time work temperature could be 75,is the best kind of tube for indoor hot and could water pipes.

3. Good decay resistance

Non-polar materials,PPR pipe can not react all the ions,it won't rust and corrosion.

4.Low thermal conductivity

PPR pipe has a good heat preservation performance,it does not need any additional thermal insulation material when for hot water.

5. Small pipe resistance.

The resistance is lower than steel pipe because of the smooth pipe wall.

6. Good hot melting performance

Hot melt could connect the PPR pipe and fittings as an integral whole,so it could eliminate the leakage hidden trouble perfectly.

7. Health,non-toxic

PPR pipe belongs to the green building materials,no pollution,no toxic.

8. PPR pipe could be recyled

Old pipe could be crushed and add in to the extruder within 10% with the new materials.

PPR Pipe :

PPR Pipe Productive Process:

PP - R / PPR Polypropylene random water pipe extrusion line(16mm-110mm)

1. Total installed power: 86Kw, 380 V three phases+N+G, 50HZ

Load factor: 55%-80%  (Actual power is 65kw)

2. Cooling circulars water: 0.6 m3/h

3. Compress air:0.8/min

4. Workhouse: 36000×3000×3000mm(length, width and high of line)

5. Products dimension: 16mm-110mm

PP - R / PPR Polypropylene random water pipe extrusion line(16mm-110mm) machinery specification:

All the PPR pipe production line:

1. Automatic Feeder and drying hopper

2.Single Screw Extruder 65/33

3.Mark line extruder SJ 25/25

4. PIPE molds

5.Vacuum sizing and spray co