PVC water gas pipe extruder / extrusion machine ( 75mm - 200mm )

PVC water gas pipe extruder / extrusion machine ( 75mm - 200mm ) is used to produce pvc pipe with 75mm-200mm diameter

PVC pipe of 75mm-200mm is widely used in agricultural water supply / drainage pipes and gas pipes

Main technical parameters of PVC water gas pipe extruder / extrusion machine ( 75mm - 200mm ):

1. Suitable material:PVC powder   

2. Output Capacity :260kg/h

The output capacity varies with the materials and the operation conditions.

3. Product specification: Φ75mm-200mm

4. Extrusion line speed: 1.5-5m/min 

5. The height of the centerline of the extruder: 1000mm 

6. Operation direction: From Left to right

The PVC water gas pipe extrusion machine ( 75mm-200mm) video:https://youtu.be/lKO6_yb53pw

The configuration of the pvc gas or water pipe extrusion line:

All the PVC pipe extrusion machine / production line:

1. 65 / 132 double screw extruder      1set

    This machine is mainly used for pipe extrusion. It is equipped with hard tooth reducer. Gear, shaft is made of alloy steel, after carburizing, grinding processing. Screw, barrel material is 38CrMoAlA, nitriding processing, equipped with automatic control panel display, digital display intelligent temperature control instrument

   Contactor: Siemens. Frequency control: ABB.

2. Mould   75mm to 200mm    1set

   Using 40Gr high-quality die steel, high precision, long service life.

3. Cooling unit        1 set

   It is equipped with vacuum pump and water pump. It is used for the shaping and cooling of the pipes. It uses the circulating water in the tank. Water supply and drainage have valve control, equipped with front and rear, left and right sides height adjustment device, which can realize 3D calibration. It is made of stainless steel, to improve the quality of the circulating water.

4. Hauling-off machine     1 set

   The unit can haul off the pipes continuously and steadfastly. It features compact and service –free structure .

5. Cutting machine (the height of the centerline is 1000mm)       1 set

6. Stacker 1unit

   Length: 10000mm

Technology and Service:

1. Seller supply full set of technical document, cutter and other full document (write in English).  

2. Seller supply training for buyer’s staff until buyer can produce the eligible production independently.  

3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer’s factory.

4. Buyer should pay the expense for our engineers including for our engineer including round-

way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.

5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all 

conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing 

and testing these machines. Buyer should pay 60USD/day.

6. When installing,people of both sides cooperate well and carefully,buyer supplies convenient working 

condition,any problem, should discuss peacefully and kindly.

7. Buyer supply proper working tools, equipments and other conditions.

8. The expense including the accommodation and materials of the trial-

run the machin