PVC health drinking water pipe extruder / extrusion line / making machine

PVC health drinking water pipe extrusion line / making machine is used to produce pvc pipe for drinking water supply.It could be produced by not only single screw extruder,but also conical twin screw extruder.

This informations is from twin screw pvc pipe extruder:

PVC drinking water pipe materials is hygiene grades,has these features:

1.No toxic,resistance to corrosion,it is not affected by chlorine or bleach in water.

2.Good water conveyance ability,small flow resistance.

3.Ageing resistance,no scaling,no rust when under 50 water,compared with other plastics.

4.Non flammable,it will quench when fire away.

5.PVC pipes is convenient installation.

Main technical parameters of plastic machine for PVC health drinking water pipe extruder / extrusion line / making machine (Conical twin screw extruder 16-63mm is referenced):

1. Suitable material:PVC powder   

2. Output Capacity :120kg/h

The output capacity varies with the materials and the operation conditions.

3. Product specification: Φ16-63mm

4. Extrusion line speed: 1-10m/min 

5. The height of the centerline of the extruder: 1000mm 

6. Operation direction: From Left to right

The PVC health drinking water pipe extruder / extrusion line / making machine video:https://youtu.be/fIMRZBsukqk

PVC health drinking water pipe extruder / extrusion line / making machine Specification:

 1. 51/105 double screw extruder      1set

     This machine is mainly used for pipe extrusion. It is equipped with hard tooth reducer. Gear, shaft is made of alloy steel, after carburizing, grinding processing. Screw, barrel material is 38CrMoAlA, nitriding processing, equipped with automatic control panel display, digital display intelligent temperature control instrument

    Contactor: Siemens. Frequency control: ABB.

2. Mould   16mm to 63mm    1set

    Using 40Gr high-quality die steel, high precision, long service life.

3. Cooling unit        1 set

    It is equipped with vacuum pump and water pump. It is used for the shaping and cooling of the pipes. It uses the circulating water in the tank. Water supply and drainage have valve control, equipped with front and rear, left and right sides height adjustment device, which can realize 3D calibration. It is made of stainless steel, to improve the quality of the circulating water.

4. Hauling-off machine     1 set

   The unit can haul off the pipes continuously and steadfastly. It features compact and service –free structure .

5. Cutting machine (the height of the centerline is 1000mm)       1 set

6. Stacker 1unit

  Length: 10000mm

Technology and Service:

1. Seller supply full set of technical document, cutter and other full document (write in English).  

2. Seller supply training for buyer’s staff until buyer can produce the eligible production independently.  

3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer’s factory.

4. Buyer should pay the expense for our engineers including for our engineer including round-

way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.

5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all