PVC Construction Foam Board Production Line With 100% Recycled Materials, Twin Screw Extruder
PVC construction foam board extrusion line is used to produce PVC crust foam board for construction.
It could produce the board from 915mm-2400mm width.The thickness could be 0.8mm-25mm.
Pls note: the materials is all recycling PVC !!!
PVC construction boards that is PVC laminated board,a kind of sandwich board.The core is PVC foam board;both surfaces are finished with PVC sheet.The surfaces also can be finished with HPL.
After that finishing progressing,the physical properties of foam board are enhanced.This kind of board is perfect for decoration and widely used for construction,door,cabinet,table top and interlayer.
There is no-toxic,fire prevention,anti-corrosion!
The price of construction board:
For nomal solid core plastic construction board,it is near 50 USD for one board(1220mmX2440mmX12mm)
If the foam construction,with 0.7density and same strengh,the price is only 29 USD.
Of couse,this board could be recycled after construction finished.
For another construction board,it is wood board,it could not be recycled,and it is environental damaged. 

PVC construction foam board production line with 100% recycled materials summarize:
1.Power supply: 380V/3phase/50Hz
2.Materials: PVC mixed powder
3.Production specification: width:1220mm thinckness:5-30mm
4:Production application: different formula,diffrent application,but machine is same
5.Output: 400-450kg/h


The PVC construction foam board production line video:https://youtu.be/D59zUiZswO4
Here is the equipment list of PVC construction foam board production line:
1,Automatic feed loader
2,SJ80/156 Twin Conical Screw Extruder
3,Mould
4,Calibration platform
5,Cooling bracket
6.Haul-off equipment
7,Cutter
8,Stacker
Auxiliary machines:
 1,Crusher
 2,SMF-600 miller
 3,500/1000 high speed heat/cooing mixing machine

Technology and Service:
1. Seller supply full set of technical document, cutter and other full document (write in English).  
2. Seller supply training for buyer’s staff until buyer can produce the eligible production independently.  
3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer’s factory.
4. Buyer should pay the expense for our engineers including for our engineer including round-
way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.
5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all 
conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing 
and testing these machines. Buyer should pay 60USD/day.
6. When installing,people of both sides cooperate well and carefully,buyer supplies convenient working 
condition,any problem, should discuss peacefully and kindly.
7. Buyer supply proper working tools, equipments and other conditions.
8. The expense including the accommodation and materials of the trial-
run the machine for testing and other expenses(electric, water, air and worker) will be on seller’s account,
 if the buyer or their representatives do the inspection of the machines before shipment.